ATX gym rack ring

I created this simple ring with threaded end and nut to store cable attachments on the ATX PRX-510 rack in my homegym. Diameter is 14mm, thread and nut are M14. The unthreaded shaft is 60mm and can be easily lengthened or shortened if needed, as well as scaling for the entire thing. The knurling of the nut is rather agressive for both style and grip purposes, so be careful with that. 

I flattened one side of the model for printability purposes, therefore this print can be done without supports or brims whatsoever. 

This was printed in PETG, 20% cubic infil and 4 walls. The nut was scaled to 101% to improve the smoothness of the thread. You know your printer best, so I won't tell you what to do :)