Gladiator NXT & EVO Baseplate with Access Hole

A simple replacement baseplate for the VKB Gladiator NXT & EVO lines of joysticks, that provides an access hole on the bottom for changing/removing springs and adjusting the dampers.

Very useful for people who often switch between planes and helicopters, for example.

Included are two versions:

• Regular replicates the dimensions of the standard VKB baseplate and mounting hole locations (at least very close)
• Compact uses less material and is probably a bit more sturdy (due to less leverage on bending) but the mounting hole pattern is non-standard.

Intended to be mounted to something, light and not grippy for desktop use. My attachment system is baseplate → Ikea Skådis board → 4080 T-slot extrusion, using thumbscrews for quick attachment.

Included picture has a slight print error, was just a fitment test, but shows how much access you get to the insides.