Captain America inked - hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA HueForge Dark Gray 2.3 Transmission Distance: 3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #9 (0.8mm) swap to Jade White
At layer #14 (1.2mm) swap to Dark Gray 2.3
At layer #15 (1.28mm) swap to Scarlet Red
At layer #18 (1.52mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.