Fairy (3) Hueforge 200x200

Fairy (3) Hueforge 200x200

Check out my other hueforges on my profile.

Don't forget the frame! Also on my profile.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Beige
At layer #16 (1.36mm) swap to White for the rest.
 

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o