Wyze Lock Keypad Extended Base

Tired of your Wyze lock falling off your door when you press to hard? Use this extended base to stabalize your keypad.
0
14
0
96
updated February 20, 2024

Description

PDF

I attached my Wyze Lock Keypad to my door using a command strip. However, because of the additional height the command strip adds, the keypad becomes unstable.

I designed this extended base for the keypad to make it more stable, and it works like a charm.

This design assumes you have used one of the command strips with the Wyze Lock Keypad to extend the contact point with your trimmed large command strips. You could also use a medium command strip; I had large strips available and prefer the additional 10mm or so of contact they provide.

The keypad base should be assembled in this order: Keypad → one original strip → trimmed down large command strip(s).

It was printed at a .2mm layer height in Jessie Black PLA.

Tags



Model origin

The author marked this model as their own original creation.

License