Top (Part 1)
- Layer hight: 0.2mm
- Walls: 9999
- Top Layers: 0
- Bottom Layers: 2
Base (Part 2)
- Layer hight: 0.2mm
- Infill Line Width: 0.4mm
- Walls: 0
- Top/Bottom Layers: 0
- Infill: Gyroid, 10% density
Machine/Slicer
- Creality Ender-5 S1 +3dChameleon (custom g-code)
- UltiMaker Cura (custom multi-extruder profile)
Other
- Glued cork mat to base with CA glue, then cut and trim off the cork.
- 220-grit sandpaper around the sides and cork to knock off loose bits.
Original model here
Tags
The author remixed this model.
Differences of the remix compared to the original
I split the model into two parts for a multi-material print where the base infill can show through. I removed the alien and added Lake Tahoe.