Adafruit Heat Set Insert Press Counter Weight For CNCKITCHEN Attachments

Wanted more weight and a spot for me to put the CNCKITCHEN TS100/TS101/Pinecil Adaptors and tips whenever I am not using the stand. I used M5 x 20mm hex bolts and 2 x M5 Nuts for extra weight. I also included 2 spots for extra soldering iron tips for storage when you are not using the jig.

I wanted the counterweight to be heavy enough to automatically lift the soldering iron after setting the heat set insert.

I also made a 1 attachment version as well as a 2 attachment version. I also included 2 versions of each with the Bits being on either the Left or the Right side. I have only printed and tested both the Left and Right versions of the 2 attachment variations.

I am lefthanded so I prefer the bits being on the Right side as they are out of the way when I push down on the handle.

Hardware I used:
6 x M5x20mm Hex Bolts

12 x M5 Nuts

Added housing for cnckitchen ts100/101 adaptor and tips