Replica throat plate for the Ryobi RTS12 table saw. Split into two parts for ease of printing, simply glue, epoxy, or otherwise fuse the two halves together. Use the original knob and screw for locking.
For a wider opening, example for wider dado sets, add a negative part to the existing gap opening towards the wider side.
Supports are required due to required 90 degree overhangs. I printed at 0.2mm layer height, a 0.4mm nozzle and used PETG with PLA for the support interface (set the nozzle temp close with 0 top distance) . PLA might work for the main body but will warp in hot garages or workspaces. The attached 3mf has the settings I used for my print already configured for the Bambu X1C.
Reupload of another author's model to bring it to Printables.
The user re-uploaded this model. The user is not the original author of the model.