A small garage made for the 1:24 Skoda Octavia model (https://www.printables.com/model/762153-skoda-octavia-124), but you can use it for any prints with similar sizes.
For the main body of the garage, I've used 0.3 mm layer height, 15 % infill, and a minimal amount of support for the Skoda emblem.
The sliding door is print-in-place, for me, 0.2 mm layer height worked fine. The door parts can be disassembled and/or reconnected with others so you can combine different colors in one door.
The small knob on the sliding door is a 3 minute-long print with a 0.1 mm layer height. After printing it can be glued on the door.
The author remixed this model.
With the aid of the SCAD file provided by Fernando Jerez, the original garage box size was set to be able to accommodate the Škoda Octavia 1:24 model (https://www.printables.com/model/762153-skoda-octavia-124). I've put a Skoda emblem on the top of the garage and made a small knob on the door for easier opening.