Meanwell LRS-150-12 Wall Mount

I prefer bare Meanwell power supplies compared to other types when it comes to powering LED strips around the house, they tend to be more stable for the price and are customizable for more situations. I usually mount them to a wall fully enclosed but for this one I wanted to try being as minimal as possible.

I came up with a clamping style mount instead of fully surrounding the PSU this time. The bottom mount is installed on the wall first with #6 countersunk screws, passing the wires through and connecting to the PSU. Add cable ties to the wires ~25mm from the bottom of the PSU to act as a strain relief and prevent them from being pulled out by mistake. Slide the PSU in place then pin it down with the top mount.