Caliper Case (With Caliper Clipart)

Box just fits on a standard 256x256 mm build plate at a 45 degree angle. I would recommend a textured PEI plate to print both the lid top-down and the box on in order to get a nice surface finish.

Increased the box's length, decreased the box's height, and decreased the box's width in order to accomodate a standard caliper inside.

Printed the box in Bambu Tough PLA, printed the latches in Bambu PETG, printed the seal with Overture TPU, used 4 x M4X30mm machine screws (bottom of each latch location + each hinge) and 2 x M3x30mm machine screws to fix top of box latches to lid. I used packing foam as the soft medium to protect the calipers.

NOTE FOR MULTICOLOR PRINTERS: the clipart of the caliper is a seperate object. Place the lid face down on the build plate and select the caliper clipart in the objects list, then make the caliper clipart whichever color you want.