Features
Introduction
If your Ender 2 Pro is at a higher than normal place, this 90 degree mount will keep the screen at a convenient viewing and working angle. Creality's screen mounting arrangement and ribbon cable provides enough space to mount the screen vertically with an adaptor plate.
Description
This bracket rotates the screen 45 degrees from its original positioning, enabling acceptable viewing angles while viewing the machine dead-on. It also frees up space behind the display at a slight ergonomic cost.
Care was taken to ensure that the screen and adapter plate has a snug fit to prevent wobbling and loosening during normal use. Please note that it is necessary to lift the lower portion of the bracket away from the printer body while uninstalling to clear the thin lips (see back of bracket).
Printed with holes facing downwards, no supports.
Conclusion
Comments and critique are welcome! I hope this little print is useful to you.
Credits
Creality Ender 2 Pro by Maboo: Thank you for the printer model for the cover photo.
Changelog
-[2024/02/20] Release
The author marked this model as their own original creation.