Minimalistic logitech Speaker Base

The base measures (approximate):

X-axis 85mm

Z-axis 35mm (from the bottom of the stand to top of base where the speaker will sit)

Y-axis 35mm

-Actual base where speaker will sit-

X-axis 85mm

Z-axis 5mm

Y-axis 77mm (with top supports accounted) 85mm (without top supports accounted)

--Print Orientation & Install--

The last photo is a reference for orientation of the print. The top supports are for thumb tacks/nails/screws/double-sided tape. It is also recommended to apply additional adhesive tape to the entire back so that it has good contact and adhesion to the wall.

---Problems?---

Feel free to contact me if you have any questions or issues with printing this design. There is no set settings that are needed for this as each printers quality will differ. The one thing I do recommend if you are having troubles with warping or bed adhesion is to turn on the brim setting.