FreeCAD Mini Desktop Drawer (Parametric)

Not original design; remake of old Target Corp find @ Goodwill

Conforms to PrusaSlicer 2.7.1 recommended thin wall thicknesses for 0.3mm layer

+/- 0.5mm vertical tolerance, +/- 0.75mm horizontal tolerance

Intended for 2:1 width to depth and heights between 50 to 75mm. FCStd file included to suit your needs. Model in pictures is 100 x 50 x 50mm

I used rubber cabinet bumpers to prevent sliding

Model was also helpful to troubleshoot my print ringing issues :()

Made in FreeCAD 0.21.1

My Print Parameters

• PLA
• 0.3mm layer
• 15% infill
• Housing: 4 perimeters 2.01mm
• Drawer: 2 perimeters 1.14mm
• no supports
• brim enabled