Nextruder heater block storage box for MK4

Update 03/03/2024:

Replaced all files, were added “click clips” and changed a little distance between the objects. 

I suggest to print model with 0.2 mm resolution or higher.

Assembly instruction:

1. Use the piece of filament to connect all parts together in model.
   Important: you can push filament from the bottom side only.
2. Find clear(transparent) piece of any packages side ~150x30mm. 
3. Use Case_top_closer.stl part as sample(pattern) to cut the same part from the transparent piece.
4. First, carefully glue transparent piece inside the Case_top.stl part, after this glue Case_top_closer.stl on top of it.

Good luck!