PrusaXL_Extruder WHA/PTFE Inline-Clips

PrusaXL_Extruder WHA/PTFE Inline-Clips

Snap-In design, two pieces only.

Designed to keep the wires and the PTFE tube within the guiding spring width.

Should help reducing the tangle between the different tools.

Update:

Following some testing i discovered that disconnecting the PTFE tube  from the two clips closer to the extruder, considerably reduces the strain and allows for larger PTFE tube bends(radii) as the extruder moves further form its parking spot. I will follow up with a Cable only Clip; although is not critical unless you pay attention to aesthetics.