Glock Double Stack Wall Mounted Magazine Holder (10 Magazine Variant)

THE BIG BOY

This model is divided between two folders, Magazine Mount Bodies and Magazine Mount Body Display Plates. 

Choose between the following options for the magazine holder body:

Plain: As the name says, this is a standard, no-frills version with no lettering of any kind.

With Plate Space: This body has a space for a thin display plate to be glued to the front. This allows you as the user to print the display plate bottom half in something like white, with a filament change halfway through to get contrasting letters in another color. The plates are only 1mm thick for the flat part, and with 1mm thick letters, so if you mess up, it's no big deal at all! I also included a blank plate, if you'd like to customize to your model of Glock. There are MANY that fit this size, and I didn't want to model plates/embossed bodies for them all.

Embossed: For those who don't want to mess with the color change plates, but still want the lettering, the embossed bodies have the same lettering options, but embossed 1mm into the body of the holder itself.

Printing Instructions: Printed with PLA+, but I'm sure other filaments work. 0.2mm layer height, brim strongly recommended, and no supports needed! 100% infill is strongly recommended for this model, especially if storing large magazines.

If this isn't the size you want, I also modeled this same concept for 1, 2, 3, 4 and 5 magazines!