Hand-E Nitrile Disposable Gloves Holder

This holds a smaller disposable gloves box and allows attaching to the wall with 3m strips.

Inner dimensions: 77mm x 95mm x 155

Let me know if there's any other sizes or adjustments that would help you!

Printed on my Prusa Mini with default PLA settings.

Most of the hex grid only requires the 2 outer walls, but some of them are off and end up needing a bit of infill. I may revisit and clean it up when I'm more comfortable with creating grids.

Inspired by other glove holders:

https://www.printables.com/model/384415-nitrile-glove-box-holder-wall-mount

https://www.printables.com/model/664144-nitrile-glove-box-wall-mount

But they were too large and didn't provide explicit areas to attach command strips

Full designs at https://cad.onshape.com/documents/37a0b09e353884a7bde2d344/w/bbd9641fcc3271e402ec42b6/e/43f3cb65748a57a1773e54b2?renderMode=0&uiState=65d241754a6c3f53d00315f3