Number Stencil

Hello,

Recently had to make some marking on print sheets for easier identification and printed what's available on Printables after all most solutions are a search away. After using the stencil had some ideal implementations of my own and this remix is made. 

1. Alignment holes for stencil

All the number characters are centered in the middle of the box by four circles for alignment on surfaces. Making the positioning of the numbers more accurate. 

2. Reduced thickness of model and included fillets around the numberings

Save the marker tip from fraying. 

3. Included notch for easy lifting and positioning 

Fat fingers with no nails too, must as well 

Alphabet Stencil: 

https://www.printables.com/model/774319-alphabet-stencil

Following the learning and design of the Number Stencil

Printing Tip: 

If your numberings/characters are getting pealed off during first layer; increase your lifting height to clear your nozzle head from the laid filament in the Slicer (Printing Setting - Extruder - Lift Height). Hope this helps!

Credit to the original creator Silas Clough, model definitely came in handy. Made the following modifications to improve the usability 

1. Alignment holes for stencil
2. Reduced thickness of model and included fillets around the numberings 
3. Included notch for easy lifting and positioning