Glue Stick Holder
Description
PDFA remix of the original Glue stick holder design, it was printed on a Prusa Mini+ using Prusament PETG @ 0.15 quality setting. I am thinking that printing with PLA would have given me a better surface finish, the next print with Prusament PLA will tell.
The model changes were initially made because I was having issues with cleaning up the alpha characters and their associated overhangs, whether using supports or not, purely my design issue I am sure but to correct this I changed the alpha character height to 0.5mm and that helped quite a bit.
The remainder of the design changes were purely aesthetic and an attempt to decrease the amount of material used + experimenting with part configuration and printability.
The design was created in CREO Elements Express and the .stl file sliced using the Prusa Slicer
Model origin
The author remixed this model.
Differences of the remix compared to the original
Remixed the original design since I was having issues with the alpha numeric characters and being able to cleanup the overhangs; I am sure my issue and how I printed it. To accomplish this I decreased the alpha numeric character heights to 0.5mm.
The remainder of the design changes were purely aesthetic and an attempt to decrease the amount of material used + experimenting with part configuration and printability.
The design was created in CREO Elements Express
