2-IN-1 -> TNT-THRILLS: GAME CHANGING CONTROLLER DISPLAY WITH A SECRET BATTERY ORGANIZER

Introducing our unique Gaming Console Controller Holder and Battery Organizer, designed to level up your gaming setup! This cool cube-shaped stand features a TNT theme, with "TNT" written on the sides and a TNT box trigger pull on top. It's not just a stylish decor accessory but also a functional solution for your gaming needs. The cube is 10 cm (3.94 inches) on each side, with a trigger part extending 12.5 cm (4.92 inches) above, making the total height 22.5 cm (8.86 inches). Lift the TNT box to reveal a hidden compartment that can neatly store up to 12 AA batteries – perfect for keeping your gaming essentials organized. Showcase your Xbox or PS5 controller on the stand and add a touch of creativity to your gaming space. Get ready for a blast of fun and functionality with our TNT-themed gaming accessory!

DESIGN SPECIFICATIONS: 

Bottom part:

Print Dimensions: Height = 3.1 cm (1.22 Inches) | Base = 9.2 cm x 9.2 cm (3.62 Inches x 3.62 Inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 1 hours and 39 Minutes

Amount of material required: ~ 19 m

Top Part:
 

Print Dimensions: Height = 10 cm (3.94 Inches) | Base = 10 cm x 10 cm (3.94 Inches x 3.94 Inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 4 hours and 22 Minutes

Amount of material required: ~52 m


Connector Beam:
 

Print Dimensions: Height = 7 cm (2.76 Inches) | Diameter = 2.5 cm (0.98 Inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 56 Minutes

Amount of material required: ~3.75 m

Controller Holder part:

Print Dimensions: Height = 7.5 cm (2.95 Inches) | Base = 12.3 cm x 7.8 cm (4.48 Inches x 3.07 Inches)
Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 1 hour and 17 Minutes

Amount of material required: ~11 m
 

4x TNT letters:

Layer height: 0.2 mm

Infill type: Gyroid

Infill percentage: 12%
Print speed: 250 mm/s 

Print time: 24 Minutes

Amount of material required: ~2.8 m

TOTAL PRINT TIME: 8 Hours and 38 Minutes
TOTAL PRINT MATERIAL: ~ 88.5 m