Philips Sonicare Case for DiamonClean Series (with charging cap)

Remix of the excellent Philips Sonicare Case, but adjusted for the Philips DiamonClean series, which has a slightly different form and is slightly bigger. 

I have added a Silhouette to test, whether the toothbrush will fit, so you can check before printing the whole case (see below for models that should be compatible).

I had a travel case with charging functionality for this toothbrush which was really big and had a stupid USB-A-Cable. I put the charger in the lid of this travel case and added a USB-C-Port to it (see photos). You will need to by a USB-C female connector (see photo below for dimensions) … three of them will cost you ~2€ on Ebay. There are two versions of the lid with the USB-Adapter. The v4 one can host a better USB-C-Female connector that works with USB-C → USB-C scenarios as well (the cheap USB-C-Female adapters only work with a USB-A → USB-C scenario, as they do not support USB-PD (power delivery)). V4 is optimized for Adapters like this: https://de.aliexpress.com/item/1005005747849999.html (or see photo above if link is dead). There is a test print stl to check if your potential adapter will fit.

The diamond series is slightly bigger, so the toothbrush end is longer than the case, which is why the lids have an additional small opening.

I removed the nippel from the top case (the diamond series does not have a hole in the bottom) an created a lid without the toothbrush holder: this way you can fit two head on one side.

Mix and match the lids to your liking. Use brim for the main part. Print the holder in PETG, note the direction of the printing (see photo), or otherwise it'll break immediately.

I changed the skrew holes slightly bigger to fit M2,5x6mm countersunk bolt (Senkkopfschrauben), as the mini skrews always broke for me.

I think the following models should be compatible, but better print the test-silhouette and check before.

HX8494 / 01 , HX8494 / 71 , HX9000 / 04 , HX9902 / 64 , HX9902 / 65 , HX9902 / 67 , HX9911 / 07 , HX9911 / 10 , HX9911 / 27 , HX9911 / 29 , HX9911 / 37 , HX9911 / 53 , HX9911 / 94 , HX9912 / 07 , HX9912 / 18 , HX9912 / 36 , HX9912 / 40 , HX9913 / 03 , HX9913 / 17 , HX9913 / 58 , HX9913 / 90 , HX9924 / 01 , HX9924 / 02 , HX9924 / 03 , HX9924 / 05 , HX9924 / 06 , HX9924 / 07 , HX9924 / 21 , HX9924 / 22 , HX9924 / 23 , HX9924 / 27 , HX9924 / 34 , HX9924 / 36 , HX9924 / 42 , HX9924 / 61 , HX9924 / 65 , HX9924 / 91 , HX9926 / 03 , HX9934 / 05 , HX9934 / 16 , HX9944 / 02 , HX9944 / 03 , HX9944 / 05 , HX9944 / 08 , HX9945 / 01 , HX9957 / 61 , HX9974 / 26 , HX9984 / 02 , HX9984 / 05 , HX9984 / 07 , HX9984 / 08 , HX9984 / 09 , HX9984 / 27 , HX9984 / 28 , HX9985 / 01