Cigarette Lighter to Binding Post (Banana Plug)

This design converts a standard 20mm (outer diameter) cigarette lighter to binding post (banana plug), i designed this for use with my ICharger (hobby charger) for charging RC batteries in my car.

Standard 20mm (outer diameter) Cig lighter plug slides into the print (I have included the STEP file incase your plug is not 20mm so you can edit to suit). I secure the plug in with a couple of drops of CA Super Glue.

Add you binding posts with a short bit of wire connecting back to the cig lighter.

I used a drop of CA Super Glue to secure the Lid to cover up the wires and back of the posts.

Printed in PLA with no Supports.