1/8 DIN Benchtop Enclosure with Print in Place Legs

Simple 1/8 DIN Enclosure with Print-in-Place Legs, 10 Degree Elevation
2
18
0
321
updated February 20, 2024

Description

PDF

A simple benchtop 1/8 Din Enclosure 

Note: There are two version! I highly recommend printing the Print-in-place version as the legs can be difficult to snap in afterwards. There is a 0.20mm clearance between the legs and the outside of the enclosure and a 0.25mm clearance on the ball radius of each leg joint. See pictures for suggested support generation. 

Design Features: 

  • 10 degree angled legs, about 3-5 degree when folded down. Helps with viewing on your bench/desk 
  • Print in Place design (use supports from build plate only!) 
  • 1/8 Din Cut out 
  • Countersunk mounting rails (#4 clearance)

Parts: 

  • 10C2 Fused Power Adapter (https://www.digikey.com/en/products/detail/delta-electronics/10C2/2560386) 
  • 1/8 Din Electronics
  • x4 2-56 Heatset inserts (https://www.mcmaster.com/93365A112/) 
  • (Optional) 7/32" Wire Grommet (https://www.mcmaster.com/9600K114/) 

 

 

Tags



Model origin

The author marked this model as their own original creation.

License