Version(s)
V1.0 - 15Nov24 - Initial Design
V2.0 - 06Jan24 - Added bottom bracket
----
Description
After a few years, I noticed some heads were popping off the holders, so this little top/bottom bracket is to be used with x2 cable ties to keep it in place.
Note: Don't put the cable ties too tight, or the mount to the motor can get cracked. Also, you should do a calibration of the valve after fitting this in the loxone config
----
Parts
N/A
----
Print Setting
I've used a 0.6 nozzle and some extrudr NX2 PLA and has been working fine. I would recommend PETG is you have.
----
General
I've included the .3mf and the original fusion .f3d if you wish to mod to your liking. Please add the remix link back to me :)
The author marked this model as their own original creation.