Trophy Truck V4 4x4 main chassis parts

https://youtu.be/aHf-W1n8ITU?si=BQhXFbC39kVWgMhv

Check out my profile for the rear axle and all the other parts.

-You will need M3 Nuts and Screws in 10, 12, 16, 20, 25, 30 and two in 55mm lenghts. 

-12x18x4mm bearings. (Just buy 20 or so, you will brake some eventually and they are dirt cheap)

-MG995 sized servos

-RC remote

-120mm shocks in the back and 100mm in the front

-8x 4mm ball joints

-14x 3mm ball joints

-3300kv 540 (3652) sized brushless motor with a 12 tooth Modulus 1 gear. 

UPDATE 14.10.2024:

reinforced 12T Pinion for easier printing

UPDATE: 16.10.2024:

added front lower controll arms with thighter shockmounts (6,2mm instead of 7,2mm)

UPDATE 15.12.2024:

update package 1: https://www.printables.com/model/1109100-trophy-truck-v41-update-package-1-rear-suspension