Scale up Shortsword and Black Knight Sculptured Triangular Shield (Multi-color)

Print Setting

Short Sword

Nozzle diameter: 0.4mm

Layer height: 0.15mm 

Support: Yes for the body of the sword. No for the rest. (see the settings in the 3mf file)

Brim: No

Infill: Any

Multi-color: No

Material: PLA (Silk PLA recommended for its shiny look.)

Filament used in the example:

• Silver: Mika3D Silk PLA -  silver
• Gold: Mika3D Silk PLA -  gold

Triangular Shield

Nozzle diameter: 0.4mm

Layer height: 0.15mm 

Support: Yes for the handle. No for the rest. (see the settings in the 3mf file)

Brim: No

Infill: Any

Multi-color: Yes

Material: PLA (Silk PLA recommended for its shiny look)

Filament used in the example:

• Silver: Mika3D Silk PLA -  silver
• Blue: Prusament PLA - Royal Blue 
• Yellow: Prusa PLA (not Prusament) - Yellow 
• Red: Amazonbasic PLA - Red

Assembly Instruction

Print all parts of the item plus a twist screw. Connect the bottom and the body with the screw. As the screw is no visible after the assembly, it can be used as the wipe object for print with MMU.