Clothes Dryer Pod extension hub/arm

This is an extension for many clothes dryer pods.

Originally made for a Lakeland model, but will fit others.

It fits in the 1st joint above the dryer to give more hanging space.

Print the main hub, 6 arms and 6 caps in PETG or ABS. PLA may distort under the heat.

Use aluminium or carbon fibre tube 8mm in diameter and fit into the arms with superglue.

Fit the caps on the end of the arms with superglue.

Use 3mm x 20mm machine screws and locknuts to attach the arms to the hub.

Fit over the 1st tube on the dryer and screw down the 2nd tube to clamp it in place.