Toy Blaster - 6mm balls

Toy Blaster that shots 6 mm plastic balls.Spring driven firing mechanism.Magazine holds about 200 balls.
Your funds support the creator's further activity.
$5
18
0
654
updated September 23, 2024

Description

I printed the Blaster and mechanical parts from PLA and need to use supports (in Cura i set Support Roof Density to 66.6%). I also recommend printing TPU rubber rings for shock absorption. Due to the force of the impact, it is also necessary to use a 3 mm x 50 mm wood screw to strengthen the launcher, because without the screw, in my case, the force of the impact broke it.

To assemble the Blaster you need:

 -  4x M3x20 mm screw with countersunk head
 -  1x M3x16 mm countersunk head screw
 -  2x M3x6 mm screw with countersunk head
 -  1x 3x50 mm screw (for wood)
 -  1x pen spring
 -  1x compression spring 1mm x 13.5mm x 80mm (I used this spring)

     https://www.vyroba-pruzin.cz/p/pruzina-tlacna-1x13-5x80

- or 1x compression spring 1mm x 13 mm x 80 mm

     https://a.aliexpress.com/_mt7aFRg

- or 1x ...

     https://a.aliexpress.com/_mtjMkA6
 

YouTube video: https://youtu.be/sQxsGMFxepY

Tags



Model origin

The author marked this model as their own original creation.

License