Shell Casing Necklace Maker

Introducing the Shell Casing Holder for Boring Operations™

Are you passionate about firearms? Want to make a necklace for you or your loved one? 

This tool allows you to drill a perfectly straight hole into a brass casing. The hole at the bottom allows easier removal after the process is done. 

The tool is available for different caliber sizes: 

• 9x21
• 9x19
• 45 ACP

More caliber round casings will be added in the future. Stay Tuned!

----------------------------------------------------------------------------------------------------------------

Instructions:

1. Place a spent cartridge inside the slot with the primer side facing downwards.
2. Insert “Part 2” and lock the casing in place.
3. Place a wooden tile underneath the casing holder to avoid ruining other surfaces.
4. Use a 2mm or 2,5mm drill bit and safely make a hole through the casing.
5. Remove the “Part 2” top cap.
6. Use the hole at the bottom to push the casing out.

Be careful not to injure yourself while performing the drilling operation and while removing the casing. Metal chips created by the drill bit can cause eye injury, can be swallowed or may cause cuts. Ensure to wear PPE (Safety Glasses, Gloves, Face Mask).

Danger: Do NOT attempt to drill holes on live rounds.

------------------------------------------------------------------------------------------------------------------

If you liked this model, please consider supporting us by getting us a nice cup of coffee. It helps us keep our models free for everyone.

https://www.buymeacoffee.com/Polymera