Dragonstaff spikes

My initial draft of TPU printed dragonstaff spiral spikes. Dependent on the infill, the spikes are harder or softer. I used 25% infill and its perfect for practise in our flat. 
The base/mount for the staff is for 22mm diameter staffs. If you need other dimensions, please write me.

You need HEAT-SET INSERTS for the inner holes  and a bunch of M3/M5 screws. 

My dragonstaff weight is 750g in total for a 160cm carbon staff. (22mm X 2mm)

Printed on a elegoo neptune 3 pro printer with amazon basics TPU.