RTK Radio Base - Rover Ardusimple simpleRTK2B ANN MB antenna case

RTK Rover or Base for radio module
11
116
0
979
updated April 11, 2024

Description

PDF

Notes:

Phase offset 80mm from bottom of pole mount.

Designed for m2.5 hardware.  

 Use the (4 mounting hole) battery holder variant shown in pictures.  There is a 2 mounting hole variant that will not fit because the terminals are in a slightly different spot. 

Step down voltage regulator required. Four AA will output 6v.  Max board voltage 5v.

6 Pin JST GH Connector for power input

Shield for second Plugin Socket to run both radio and Bluetooth

Case designed for USB pigtail shown.  Mounts in case with screw and nut for external power and configuration 

You'll need to configure the board to utilize the radio on the shield, UART 1, as it won't fit in the case mounted to the board, UART 2

Tags



Model origin

The author marked this model as their own original creation.

License