Single-piece puller for Crosslink's belt tensioner

I was so frustrated with the 3-piece puller I made my own.
1
22
0
104
updated February 14, 2024

Description

PDF

So for the assembly you'll need an M4 screw of unspecified length and a nylock nut.

Before printing you can change the length of the puller by selecting “the new housing_A” part in slicer and moving it up or down, then rotate the whole object so that it is in the same orientation as in the picture

  1. Put the nylock nut into the new puller
  2. Screw the M4 screw into the nylock nut so that it looks like in the picture
  3. Make sure the screw is screwed in as tight as you can

Model origin

The author remixed this model.

Differences of the remix compared to the original

Made the puller into a single piece

License