Print, orientation and setting are the same as for any printed work for Voron.
The author remixed this model.
Only one part was modified, the other is mirror-turned. It was not necessary to modify both parts, it also has the advantage of possible endstop selection and use from the right or left side. It was also necessary to adjust the adapter for the linear. The spacing of the holes has changed.
Compared to the original, two countersunk nuts are needed to attach the BL-Touch sensor. The distance from the nozzle does not change along the X axis, it is +20 along the Y axis. Z offset is individual, according to the used extruder. With the TZ V6 2.0 extruder it is 1.52
https://vi.aliexpress.com/item/1005006049615976.html
Editing was done in Blender from the STL file.