UFO Lampstand for Moonlamp / Sphere Lithophane on lithophanemaker.com

21.02.2024 added back Cover

You need 4x M3x10 screws, a lamp holder E27 with M40x2.5 external thread sheath + lamp and the previously printed model from lithophanemakers.com (Lithophane Sphere Maker) with standart Cylinder Parameters (70mm Cylinder x 25mm Cylinder hight + 5mm thickness and 75mm Cylinder Ledge Outer Diameter)

-This Models are clean and without Text- You can easy add Text in Prusa Slicer if you want. Only in my Pics with this Text.
I made this for my Girlfriend for Valentines Day :D

1: First you screw the top and bottom together with the 4x M3 screws. Sometimes you have to clear the hole for the screws from below. Then you can easily insert the lithophane.

2: Now screw your E27 lamp and the thread adapter together - once this is done, you can screw the adapter into the lower part of the "UFO".

3: Slide the engine cover over the cable to the thread adapter and secure it.
Complete. :)

It looks best with an RGB lamp with color changing, but a normal lamp also works.

Kind regards and have fun printing. I hope you will enjoy.