Sticky/post-it note holder with stencil. Parametric.

holder for standard 3"x3" sticky notes with folding stencil
177
1088
18
3423
updated February 14, 2024

Description

PDF

Desktop holder for standard 3x3 inch sticky notes with a hinged stencil. Hinge height, number of lines, and box vs circle are all freely configurable via the onshape link below. I've included STLs for a few useful configurations.

 

  • Onshape link:https://cad.onshape.com/documents/0ff2cbc52ce130ecfce94f37/w/ceff00e68b1ccac66c309388/e/4f26cb9478a4b44f2122fce5
  • Print details:
    • Print in PLA, I used 4 walls so it essentially has no infill
    • 0.2 layer height worked fine

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Redesigned from scratch, but inspired by this model. Main differences are below:

  • Ability to prop stencil vertically instead of folding all the way back
  • Slightly different stencil design/arrangements
  • Parametric (via onshape) for hinge height and stencil design details

License