Sticky note holder with stencil. Parametric.

Desktop holder for standard 3x3 inch sticky notes with a hinged stencil. Hinge height, number of lines, and box vs circle are all freely configurable via the onshape link below. I've included STLs for a few useful configurations.

• Onshape link:https://cad.onshape.com/documents/0ff2cbc52ce130ecfce94f37/w/ceff00e68b1ccac66c309388/e/4f26cb9478a4b44f2122fce5

• Print details:

  • Print in PLA, I used 4 walls so it essentially has no infill

  • 0.2 layer height worked fine

Redesigned from scratch, but inspired by this model. Main differences are below:

• Ability to prop stencil vertically instead of folding all the way back
• Slightly different stencil design/arrangements
• Parametric (via onshape) for hinge height and stencil design details