X1c Nozzle/Complete Assembly Multiboard Mount

Organize and store your Bambu X1C Hot Ends on your multiboard
7
45
2
234
updated February 14, 2024

Description

PDF

I wanted to mount my Bambu X1c Nozzles and Hot End Assemblies to my Multiboard wall but wasn't finding anything that i liked so here we are.

 

2 Versions, both use the Octagonal push fit to attach to your multiboard:

  • X1c Nozzle Only - as the name implies is designed to fit just your hot ends. Because of the Heatsinks being not symmetrical with the shaft of this, This design needs to skip a space next to it.
  • X1C Complete Assembly - This is the version i would recommend you go with. It has a clip designed into it to help manage the wires from the heater/fan/Thermistor. This one i designed to not be symmetrical with the Push Fit mount, allowing you to line these up side by side without the heat-sink/Fan interfering.
  • X1c Adaptor - Obviously if the Complete Assembly fits the nozzle along with heater and the sock around it, you can also just put in a bare hot end, but i wanted to make a little sleeve because my OCD wouldnt allow me to store my hot ends not perfectly square.

I've uploaded a print profile for multiple colors, I printed mine sitting on that face to reduce filament poop and the end result is a much sharper image. The logo is easily colored with the flood fill tool, If you plan on printing this in a single color, orient the model so the top surface is facing downward, then you wont need any supports at all.

 

If you try this out and like it, please share your results.

Tags



Model origin

The author marked this model as their own original creation.

License