Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Control3d Black
PLA Overture Chocolate
PLA Prusament Lipstick Red
PLA ESUN PLA+ Beige
PLA Control3d White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Chocolate
At layer #12 (1.04mm) swap to Lipstick Red
At layer #16 (1.36mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.
The author marked this model as their own original creation.