Keyring Screwdriver

This is a keyring screwdriver with a hole allowing you wo hold a screwdriver bit with a small tip. For example, an S4 or PH1. this screwdriver has a normal bit driver and a high torque bit driver on the side. A 2.5cm ruler can be found on the side of the screwdriver. You can superimpose your name or any other text on the side of this screwdriver. to store a screwdriver bit, insert it backwards into the normal bit driver. This screwdriver has a diameter of 12mm allowing it to be easily stored on your keys with the large keyring hole.

• 3g
• 20 minute print time (on an Anycubic Kobra, which I think is fairly standard). 
• Print with 50% infill.
• No support needed.
• No adhesion needed for me although you may have a different print bed and may need it.
• Do not resize as it is designed to fit ¼ inch screwdriver bits.
• some post-production filing may be needed but mine was fine as it was.

I hope you like my design and if you have any ideas about how it could be improved, please leave it in the comments. This is the sixth version of my model and I'm always ready to make a seventh!