RatRig VZ Printed Toolhead MGN9H

Hello!

Here is my version of the VZ printed toolhead compatible with RatRig V-Core 3.1.

As mentioned by @UjangKarnadi_294653 in his original post,  please refer to vz printed printhead for assembly, print settings and belt clips.

Top features:

• MGN9H only;
• 3010 hotend cooling fan, quieter and lighter than the stock 4010 fan;
• Phaetus Rapido UHF V1 or V2 + Orbiter V2 only, they bolt directly to the top plate, no adaptors needed, less parts;
• 4028 (not tested, ensured the CAD is correct) or CPAP cooling;
• kept the same ADXL mounting location as RatRigs EVA toolhead (heat inserts required);
• might be required to remove the metal lever of the endstop switch, mine rattled a lot. If not, the arm included in the mount can be cut off;
• another method of belt tensioning is required;
• .step files included.

It's an ALMOST direct replacement of the EVA toolhead that comes stock with the RatRig kits. The hotend and extruder are bolted directly to the top plate, 2 cooling options, CPAP or 4028.