pulling rope handle / Zugseilbommel

If ever someone asks you to get rid of those loose ends, this is what you'll be looking for.

Printed with PLA:

• 2 perimeters
• 15% infill
• 0.4mm nozzle
• 0.2mm layer height (use .10-.15mm for threads with V2)

Increase infill percentage if you want more weight or add small stones to V2.

versions:

1. no threads, 3 parts, bottom snaps into place to close inner piece. Assemble from inside out.
2. with threads, 2 parts, assemble by screwing parts together after tying a knot below the shell. use a coin or your neighbors toe nail to twist the inner part.