The "Why do I need all this USB & SD media" Holder - Cubby Remix

Overview

Minor remix of @EricCarlisle_1293126's USB Holder. I removed 8 of the SD holder slots (because I don't have that many adapters, and honestly, if I did, I could toss some of them) and I made them into a little cubby to hold the caps of the USB sticks.

This will hold:

• 24 USB-A devices
• 8* SD cards
• 29 MicroSD cards

Dimensions

• Length: 124mm
• Width:8 4mm
• Height: 18mm

Estimated Resources (using Cura 5.6.0):

• Print Time: 12hrs, 51min (with 50mm/s print speed)
• Material Use: 77g, 25.90m

Printed in standard quality at 0.2mm

Print Settings

Printer Brand:

Creality Ender 3 V2 Neo

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

20% Gyroid

Filament: 

Comgrow PLA Yellow

Removed 8 of the SD Card/adapter slots and turned it into a cubby to hold the caps of the USB sticks that had them.