The HIVE - Module with wall mount back
Just a small remix to be able to wall mount the HIVE module V3 from dto26. If you scaled the original modules, you…
10
44
2
260
updated
February 18, 2024
Description
PDFJust a small remix to be able to wall mount the HIVE module V3 from dto26.
If you scaled the original modules, you need to apply the same scale on this one.
Also, be aware that the inside length of the module is reduced because of the back being thicker to handle the weight of all connected modules so don't forget to adjust the size of the drawer accordingly.
The screw hole is 4mm wide.
All credits goes to dto26 for his original design
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
0%
Notes:
I use ~1mm wall thickness with no infill, it's solid enough.
Tags
Model origin
The author remixed this model. Imported from Thingiverse.
Differences of the remix compared to the original
Just a small remix to be able to wall mount the HIVE module V3.
