Tuya CBU Flashing Jig

Solderless clip on jig to enable custom firmware flashing to the Tuya CBU module
2
47
0
268
updated February 13, 2024

Description

PDF

This is a small clip on module that does not use pogo pins but allows for solderless connection to the Tuya CBU module for flashing custome firmware.

This should be printed end on (small side with wire holes closest to the print plate) with 1.5mm layer height.

Use solid core cable to make the contact with the module solder pads.

 

Tags



Model origin

The author marked this model as their own original creation.

License