NutCase - Vertical ITX PC Case - Screwed-in Front
Same as the original vertical nutcase, but with holes/inlets for m3 nuts/bolts in the front/side panels.
1
18
0
343
updated February 14, 2024
Summary
PDFSame as the original vertical nutcase, but with holes/inlets for m3 nuts/bolts in the front/side panels.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Same as the original vertical nutcase, but with holes for screws in the front panels and respective m3-nut inlets in the side panels.
In the case of bulging (such as fron a stiff PCIE riser cable), the original front panels would jut out, affecting structural integrity and aesthetics. This remix fixes that problem. Still, I would not pick up the case by the sides, as these bulge inwards. Advise to use zipties to connect sides A and B together.
Requires at most 8 more m3 bolts. Used preferably with washers.
The only downside is that the front panels no longer have a uniform color scheme, due to the bolts/washers.
