- This model is created from three parts - Body, bottom part and upper part
- magnets must be inserted into the holes after printing the model - you will need 12 magnets of size 5X2mm and 2 magnets of size 4X2mm.
- you will also need a pen spring


- magnets need to be glued to the model
- I used 0.4 nozzle, 0.15 mm layer height and 20% infiltration.
- you need to print with supports.
- I printed it on Prusa MK3S and I used prusament
Tags
The author marked this model as their own original creation.