Filament Sample Holder v2
Description
PDFThis filament sample holder is intended to be used with the samples created by Extrutim and can be found here.
Version 1 of the model can be found here.
I have made the sample holder to be able to stick to the AMS of Bambulab, so I can see which filaments are in there in which position.
On the filament samples I print the hotend and bed settings as well, so I know what to use as recommended settings.
My workflow is to always create a filament sample for each new filament and keep it in the box that I printed by Extrutim. When switching filaments, I also replace the sample in the holder.
v2 Changes
The addition in version 2 is to have a small lip at the top of the model, so the samples don't fall out when opening the AMS.
What you additionally need:
- double sided tape
I used the following settings to print in 1.75 PETG with 0.4 nozzle:
| layer height | 0.2mm |
| walls | 2 |
| top shell layers | 2 |
| bottom shell layers | 2 |
| infill | 15% grid |
| raft or brim | none |
| support | no need if oriented right way up |
Leave a like, make or remix as you like!
Tags
Model origin
The author marked this model as their own original creation.
