C922 Webcam mount for Ender 3 S1 Plus
Description
PDFI could not find a good enough webcam mount for either my webcam or the printer I am using so I made my own. it mounts on the right side of the printer head bar. There is also a hole for a screw in the print just if you would need to secure it more tightly.
The screw I used is not made by me you can find it here: https://www.thingiverse.com/thing:3160367
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20% minimum
Filament: Creality3D PLA+ I used grey
Notes:
Make sure that you add a support blocker on the bridge between the "legs" or it will break off when you are taking off the supports. though that bridge is just aestetic serves no purpose. I used 15% infill with 8mm infill line distance but I would suggest using at least 20% infill
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.