Handheld vacuum cleaner holder

The handheld vacuum cleaner WHJC battery handheld vacuum cleaner was the basis for this model. The construction is constructed in such a way that the vacuum cleaner is always at hand. With two screws with a diameter of 4 mm, the holder can be attached to a shelf or similar.

The holder was screwed to the side of an IKEA Ivar shelf. For better screw connection, a recess was left at the front. 

The holder was printed with Extrudr XPETG in metallic matt. With a 0.6 mm nozzle and a layer height of 0.2 mm.

Print settings

• 0.6 mm nozzle
• 0.62 mm line width
• 0.2 mm layer height
• 15% filling density
• No support